HSL1556 HEOSafe 1556 For Master & Movano (2000-2010) Daily to (2014) Security Locks For Cabin Doors

Assembly on the inner frame of the door

INSTRUCTIONS FOR USE

• Push the knob down and turn it to close or open the door.
• The turning knob blocks as soon as the lock is closed or unlocked completely.
• Turning the key fixes the current position of the turning knob: locked or unlocked 

ASSEMBLY INSTRUCTIONS

• Position the lock at the inner frame of the door. The distance between the body of the lock and the B pillar should be approx. 3 mm.
• At the height of the bolt, push the rubber seal between the B-pillar and the plastic cover.
• The lock, with the bolt turned completely out, should be positioned so that the bolt touches the plastic cover.
• Now mark carefully the drill holes.
• Remove the lock again, and drill the holes with a drill bit of 3,2 mm.
• Take a 4 mm Allen Key® and fix the lock with the special sheet metal taping screws.

IMPORTANT INSTRUCTION FOR USE
After finishing the assembly, close the door carefully and pay attention the HEOSafe ® Lock passes the rubber seal without any difficulty.